Integrated ODM & OEM Solutions Provider for Industrial Frequency Converters

Product Category

DC reactor (DCR)

SKU:
Availability:
Quantity:
DC smoothing reactor rectifier circuit being used to suppress ripple rectified pulsating component and make rectified current continuously Improve the output waveform tributaries.to ensure the normal operation of the DC devices.

Product Feature

Product Introduction

DC smoothing reactor rectifier circuit being used to suppress ripple rectified pulsating  component and make rectified current continuously Improve the output waveform tributaries.to ensure the normal operation of the DC devices.

Product Application

  1.Suppress the waveform distortion of input current caused by capacitive filtering
  2.Reduce and avoid overheat of capacity and rectifier bridge damage both of which arise form  surge current
  3.Improve power factor and reduce the DC busbar AC pulse.
  4.Limit the instant change of the grid voltage
  5.Work with capactor to suppress or filter the current ripple for eliminating .negative influence  onload

Applicable Standards

  1. IEC289:1987 Reactor

  2. GB10229-88 Reactor(eqvIEC 289:1987)

  3. JB9644-1999 Reactors used for semiconductor electrical driving


Product Selection

Technical Specifications

 1 .Work voltage: 220VAC-1140VAC
 2.Work frequency: 50/60Hz.
 3.Work current: 3A-1600A
 4.Insulation class: class F, H
 5.Operation Environment: -10~…+45 ℃,rated value wont′t lower,when higer than 45℃,and every  1℃,the current will step down 2%
 6.Protection class: IP00-IP22
 7.Max Current: 1.5 × Rated current,continuous 60S
 8:Noise: ≤ 65dB
 9.Temperature Rise: ≤ 85K
10.Dielectric strength: Core Coil 3000VAC/50Hz/5mA/10s no electric arcing puncture (factory test)
11.Insulation Resistor: 1000VDC insulation resistance value ≥ 100M?

  12.Under seal level 2000m
  13.Running ambient temperature -25 ℃ ~ +45 ℃, comparative moisture not over 90%.
  14.No hazardous gas,no inflammables and explosives
  15.With well-ventilated condition,ventilation devices shall be mounted if installatioh in panel

Technical Parameter

Product Size

下载

Reactor Type Picture
NO.

Power

(KW)

Rated
Current

Inductance
Value(

(mH)

Insulation
rank

Dimension

L±5

D   W   W1 H   A*B
DCR-0010-6M30-0.4DC Picture A 4 10 6.3 F、H 100
80
100
70
125
6*11
DCR-0015-3M60-0.4DC Picture A 5.5 15 3.6 F、H 110 87 120 70 135 6*11
DCR-0020–3M60-0.4DC Picture A 7.5 20 3.6 F、H 110 87 120 70 135 6*11
DCR-0030-2M00-0.4DC Picture A 11 30 2 F、H 110 87 120 70 135 6*11
DCR-0040-2M00-0.4DC Picture A 15 40 2 F、H 110 87 120 70 135 6*11
DCR-0040-1M30-0.4DC Picture A 18.5 40 1.3
F、H 110 87 120 70 135 6*11
DCR-0050-1M08-04DC Picture A 22 50 1.08 F、H 120 95 135 85 145 8.4*13
DCR-0065-0M80-0.4DC Picture A 30 65 0.8 F、H 138 111 150 85 170 8.4*13
DCR-0080-0M70-0.4DC Picture A 37 80 0.7 F、H 138 111 150 85 170 8.4*13
DCR-0100-0M54-0.4DA Picture A 45 100 0.54 F、H 138 111 150 85 170 8.4*13
DCR-0120-0M45-0.4DA Picture A 55 120 0.45 F、H 155 125 160 90 195 9*18
DCR-0160-0M36-0.4DA Picture B 75 160 0.36 F、H 165 100
130 98 215 9*18
DCR-0200-0M33-0.4DA Picture B 90 200 0.33 F、H 165 100 130 98 215 9*18
DCR-0250-0M26-0..4DA Picture B 110 250 0.26 F、H 210 176 150 115 255 11*18
DCR-0300-0M26-0.4DA Picture B 132 300 0.26 F、H 210 176 150 115 255 11*18
DCR-0350-0M17-0.4DA Picture B 160 350 0.17 F、H 210 176 150 115 255 11*18
DCR-0450-090U-0.4DA Picture B 185 450 0.09 F、H 220 191 150 115 280 11*18
DCR-0500-060U-0.4DA Picture B 220 500 0.06 F、H 220 191 150 115 280 11*18
DCR-0650-050U-0.4DA Picture B 300 650 0.05 F、H 230 208 160 125 280 11*18
DCR-0800-050U-0.4DA Picture B 380/400 800 0.05 F、H 250 200
245 144 320 11*18
DCR-1000-050U-0.4DA Picture B 450 1000 0.05 F、H 250 200 280 146 360 11*18
DCR-1200-050-0.4DA Picture B 500 1200 0.04 F、H 250 200 280 164 390 11*18


Customization & ODM Capabilities

More Than a Standard Product. It's Your Custom Starting Point
This platform is designed for adaptation and supports:
Software Tailoring
Modify parameters and develop specialized functions.
Hardware Adaptation
Adjust mechanical design and swap key components.
Complete Branding
Apply your logo and packaging seamlessly.
Build Your Brand. 
Shape the Future of Industry.
Janson Controls Technologies(Shenzhen)Co.,Limited
 Add: 3rd Floor, Building E, Fuxing Industrial Park,No.110, Zhangqi Road,       
            Guixiang Community,Guanlan Street, Longhua District, Shenzhen, China.
 Tel: +86-0755-29611160
 Whatsup:+8613590499063
 Email: info@jansoncontrols.com

Quick Links

Service Support

Product Category

Copyright © 2023 Janson Controls Technologies (Shenzhen) Co., Ltd. Sitemap