loading
loading
| Availability: | |
|---|---|
| Quantity: | |
Product Feature
1. The speed loop bandwidth is up to 2kHz
2. The encoder feedback accuracy is up to 23 bits, that is, 8388608 resolution
3. The application of the absolute value encoder can save the limit switch and the origin switch, while reducing the fault point, it is convenient for wiring
4. In line with international safety standards, the motor has reached a high protection level, and it is safe and reliable to use
5. The product is convenient and easy to use: fast, accurate, convenient and easy to use
Product Selection
| Item No. | Motor Power(kw) | Motor Rated current(A) | Rated Torque (N.m) | Rated Speed (RPM) | Voltage(V) | Motor model | Servo Drive Modle | GW (kg) |
| 40 Flange | 0.1 | 1 | 0.32 | 3000 | 220 | DM4-W04M01S30 | FS700-2S-0.1 | 2.5 |
| 60 Flange | 0.2 | 1.4 | 0.64 | 3000 | 220 | DM4-W06M02S30 | FS700-2S-0.2 | 2.5 |
| 0.4 | 2.8 | 1.27 | 3000 | 220 | DM4-W06M04S30 | FS700-2S-0.4 | 3 | |
| 80 Flange | 0.75 | 4.6 | 2.39 | 3000 | 220 | DM4-W08M07S30 | FS700-2S-0.75 | 4 |
| 1 | 5.5 | 3.2 | 3000 | 220 | DM4-W08M10S30 | FS700-2S-1.0 | 4 | |
| 130 Flange | 1.3 | 6.8 | 5.4 | 2500 | 220 | DM4-W13L13S25 | FS700-2S-1.3 | 7.5 |
| 130 Flange | 1.5 | 6.8 | 6 | 2500 | 220 | DM4-W13L15S25 | FS700-2S-1.5 | 7.3 |
| 2.3 | 9.5 | 8.3 | 2500 | 220 | DM4-W13L22S25 | FS700-2T-2.3 | 8.8 | |
| 2.3 | 9.5 | 15 | 1500 | 220 | DM4-13M23S15 | FS700-2T-2.3 | 14.76 | |
| 3 | 12 | 11.5 | 2500 | 220 | DM4-W13L30S25 | FS700-2T-3.0 | 9.86 | |
| 3.8 | 13.5 | 15 | 2500 | 220 | DM4-13M38S25 | FS700-2T-3.8 | 13.86 | |
| 180 Flange | 3 | 12 | 19 | 1500 | 220 | DP4-18M30S15 | FS700-2T-3.0 | 19.64 |
Technical Parameter
| Project | Specification | ||
| Basic parameters control mode | Power supply | 2S/2T | Single phase/Three phase AC220V ±15%,50/60Hz. |
| 4T | Three phase AC380V ±15%,50/60Hz. | ||
| Rated current | AC220V | 1.6~14A,For details, see the corresponding power driver. | |
| AC380V | 3~30A(For details, see the corresponding power driver). | ||
| Control mode | Position control, speed control, torque control. | ||
| Encoder resolution | 17-bit absolute encoder (131072impulse/revolution) | ||
| Speed bandwidth response | 500Hz or above | ||
| Bleeder resistor | Built-in/external (for continuous large inertia loads, refer to the external braking resistor selection specifications) | ||
| Protective function | Overvoltage,undervoltage, overcurrent, overspeed, overload, driver overheating, encoder failure, excessive deviation, etc. | ||
| Use load inertia | Less than 10 times of motor inertia | ||
| Parameter setting method | Local keyboard input, PC software download, 485 communication writing | ||
| Signal configuration | Control input | Maximum pulse frequency | Differential input up to 500Kpps, open collector input 200Kpps |
| Control output | Pulse input method | Pulse+Direction | |
| Pulse input | Electronic gear ratio | 1~32767/1~32767 | |
| Analog input | Two analog inputs (Optional speed or torque setting) | ||
| Pulse output | No encoder feedback output | ||
| Communication interface | RS485(MODBUS-RTU protocol) | ||
| E24V Power | Nternal 24V power supply maximum output 100mA | ||
| 5V Power | Internal 24V power supply maximum output 200mA | ||
| Environment | Temperature | Working temperature: 0-45℃ Storage temperature: -20-80℃ (No freezing) | |
| Humidity | Working/storage ≤90%RH (no condensation) | ||
| IP Level | IP20 | ||
| Altitude | Altitude ＜ 1000m | ||
| Vibration | Vibration≤4.5m/s²,10~60Hz(not allowed to work at resonance point.) | ||
